Ghost 2 Immobiliser Installation
Installing the ghost 2 immobiliser is a simple and effective way to secure your vehicle from theft. It connects directly to your vehicle's CAN data network, and is almost unnoticeable.
Identify a constant source of power and a point for grounding. These wires must be insulated to avoid electrical shorts.
Protects against theft
The Ghost 2 Immobiliser uses an exclusive PIN code sequence that is created using the electronic buttons on your steering wheel or centre console to ensure that only you can start your vehicle. This means that even if thieves manage to steal your keys or hack into your car's systems, they won't be able to get the vehicle to move. It's also silent and undetectable by anyone who tries it out So you can rest at ease knowing that no one will know that you've added an extra layer to security.
It also assists in preventing theft since it can disable the engine of your car even if the thief manages to get inside. This is achieved by utilising a secondary device called the Shadow, which connects to your car's CAN data system and does not communicate via radio frequency, which makes it difficult for thieves to track or tamper with. The Shadow can also be linked to your vehicle's tracking/paging systems, which allows you to track its movements. It has an output that can be used to trigger an alarm when someone tries to steal it.
It is crucial to work in a well-lit space when working with wiring, to make it easier to identify the right wires and to prevent any accidental disconnections or short circuits. It is also essential to double-check and test connections, as well as to insulate the wiring to protect it from the elements. Cable tie can be used to bundle and secure wires. This improves their appearance, and reduce the possibility of them being lost when the vehicle is in use.
It is an excellent idea to mark the CAN H and CAN L wires with pieces of tape or labels, since not knowing where they are could lead to an electrical surge that damages the immobiliser. It is also an excellent idea to test the identified power source and grounding location with a multimeter to make sure that they provide a constant 12V power supply and a stable grounding.
Simple to use
Ghost immobilisers are an excellent method to keep your vehicle safe from theft. It stops key cloning, ECU swapping and other security threats, and can be linked with an iPhone app for easy monitoring and management. The app will notify you in the event that your car has been tampered with. The app can also help locate your vehicle in the event it is stolen.
The Ghost immobiliser is subtle and does not require any special equipment to function. It is linked to the CAN system of your vehicle, and is programmed with a unique PIN code. It can be activated with a series of buttons on your dashboard and steering wheel, or through the WeCar mobile application. The code must be entered in order to start the engine, so that thieves aren't able to turn off your vehicle and drive off.
Installing a ghost immobiliser is an easy process, however it's important to follow the instructions carefully to ensure a smooth integration with your vehicle's existing systems. The first step is disconnecting the battery. This will avoid an accidently triggered airbag, and will ensure security. It's also important to work in a well-lit location to ensure that connections are precise and avoid committing mistakes. It is also essential to employ the correct soldering techniques and high-quality connectors to ensure a secure and reliable connection.
The CAN H and CAN L wires are necessary for connecting the Ghost immobiliser to the vehicle's wiring. With a wiring diagram for your vehicle to identify these wires, locate a suitable location to connect them. Mark these wires with labels or tape to make them easier to identify when installing.
It's a great idea to test your immobiliser once the connections are made to ensure that it works correctly. It is also advisable to test the Transport Mode which disables the Ghost System and lets you temporarily switch off your security features. This is particularly helpful for scenarios like vehicle transportation or servicing. This feature is particularly useful in the event that your vehicle is old and requires the battery to be isolated during service.
Low-profile
A ghost immobiliser can be used to prevent theft from vehicles with keyless entry. It works by capturing the signal from your vehicle's original remote, and creating an obstacle that thieves are unable to penetrate without a valid PIN code. It's a secure and discreet way to protect your vehicle, and insurance companies even suggest it to lower monthly costs. It's a low-profile, hidden system that is located within the buttons of your car. It doesn't have LED indicators, which makes it virtually undetectable by thieves.
The Ghost immobiliser, unlike most other security systems is connected to the CAN data network of your vehicle, not remote control. This means that thieves will not be able to identify or disable the device through wire cutting and is impervious to tampering. This makes it harder for thieves to take your vehicle. It's also an excellent alternative for older cars that do not have a keyless entry system.
ghost 2 immobiliser near me of a ghost immobiliser can be done by a professional, or you can do it yourself using the right tools and materials. You will need basic handtools and a multimeter to check electrical values, and cable ties or insulation tape to ensure your connections are well-insulated and secure. You should also disconnect your battery prior to starting, and make sure that the wiring is neatly bundled and insulated to prevent tampering from thieves.
If you're not comfortable with installing your own immobiliser, you can find a local auto shop to complete the task for you. They'll take care of the entire procedure starting with the initial inspection right through to the installation. If anything goes wrong, they will offer a guarantee. They'll be able to answer any questions you might have about the immobiliser, and assist you in deciding whether or not it is the right choice for your vehicle.
The Autowatch Ghost 2 is a smart immobiliser that is integrated directly with the ECU of your car. This can help protect you from hacking, key cloning, and relay attacks that are common in modern vehicles. It is TASSA-verified and offers the highest level of theft protection, which means you can drive with confidence.
autowatch ghost immobiliser cost verified
The Ghost immobiliser is among the best ways to safeguard your vehicle from theft. It connects to the CAN data network of your car and uses it to prevent your engine from running without your personal PIN code. The system is not detected by thieves which makes it a fantastic alternative to an alarm for your car. You can alter the PIN code at any moment and only you'll know it, ensuring your vehicle's security.
A TASSA verified installer will complete the installation of Ghost Ghost system in a couple of hours at your home or at your place of work. They will also provide you with owners' guides, installation certificates and a no-cost emergency card. They will also show the equipment to you and ensure that you are satisfied with the service.
The Ghost, unlike other immobilisers, can connect directly to the CAN data network of your vehicle. It can be installed without needing to cut any wires. It's also quiet and is therefore difficult for thieves to identify. The system is equipped with a unique and reversible PIN code that you enter by pressing buttons on the dashboard or the steering wheel. This blocks anyone from starting your car, even if they have your key fobs.
Connect the battery prior to installing a ghost 2 immobiliser. This will stop any accidental airbag deployment or short circuits during the process. After the battery is disconnected, it's vital to adhere to the user's manual's instructions for connecting the immobiliser. Consult online resources to get additional information specific to your model.
You should test the immobiliser following completion of it to make sure it's functioning properly. You can do this by entering the PIN code and trying to start the vehicle. Then, you must conduct regular checks on the immobiliser to make sure it's working correctly. This will allow you to identify any issues early so you can resolve them quickly.